Technics SC-EH760 - Manual (Page 32)

Recording operations
RQT5355
32
DISC1–5
EDIT
@
@
SC-EH760 SC-EH560
SC-EH760
SC-EH560
EDIT EDIT
Î NR 2
REC
EDIT
2
3
1
@
H REC
PAUSE
A
B
Î NR 2 REC
2
3
1
EDIT
@
3
Recording CDs
Preparation:
³ Do the preparatory steps ( ➡ page 31).
³ Insert the CD(s) you want to record ( ➡ page 12).
³[SC-EH760]
Press [DISC 1]–[DISC 5] on the CD changer to select the disc
where you want to start recording, then press [
º ] to stop the disc.
»
A Normal recording
1
Press [
"
]
(reverse side)
or [
!
]
(forward side)
then [
º
] to set the tape direction.
2
Press [
´
REC PAUSE].
The deck goes into the recording standby mode and the indi-
cator “
" ” or “ ! ” starts flashing.
3
Press [
!
] on the CD changer or CD
player.
Recording starts automatically.
4 seconds after the CD(s) finishes, the deck goes into the recording
standby mode.
To stop recording
EITHER
Press [ º ] on the CD changer or CD player.
The deck goes into the recording standby mode 4 seconds later.
OR
Press [ º ] on the deck.
Recording stops immediately but the CD continues to play.
To record programmed tracks
Program tracks before step 1 ( ➡ page 14).
»
B One touch CD editing
This function makes it easier for you to record from discs.
³ When recording, if a track is cut off in the middle at the end of the
front side, it is recorded from the beginning on the reverse side.
³ At the end of the reverse side recording stops and the current track
will be interrupted.
After pressing [ " ] or [ ! ] then [ º ] on the cassette deck to set the tape
direction,
Press [EDIT].
Recording starts. In the meantime, “CD EDIT” will scroll across the
display from right to left.
After edit-recording has finished
The cassette deck automatically stops.
To stop editing
Press [ º ] on the CD changer or CD player. The cassette deck also
stops.
“EDIT OUT” is displayed.
To edit programmed tracks
Program the tracks ( ➡ page 14) and press [EDIT].