Technics SC-EH760 - Manual (Page 43)

43
Reference
RQT5355
For a cleaner crisper sound
Clean the heads regularly to assure good quality playback and
recording. Use a cleaning tape (not included).
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a soap-
and-water solution or a weak detergent solution.
³ Never use alcohol, paint thinner or benzine to clean this unit.
³ Before using chemically treated cloth, read the instructions that
came with the cloth carefully.
The CD changer or CD player
The display is wrong or play won’t
start.
[SC-EH760]
“TAKE OUT/DISC” appears on the
display.
The disc may be upside down. <
Wipe the disc.
Replace the disc if it is scratched, warped, or nonstandard.
Condensation may have formed in the changer or player due to a sudden change in temperature.
Wait about an hour for it to clear and try again.
There is a problem with the CD mechanism. (A power failure may have occurred.)
The tray will open automatically. Remove the CD from the tray, and after ensuring there is no CD in
the tray close it. The unit will make the disc changing noises for a few moments and then it should
operate normally.
During “One touch” editing ( ➡ page 32)
“DECK NO TAPE” is displayed.
“DECK CHANGE TAPE” is
displayed.
Load a cassette into deck 2. O
If the erasure prevention tabs have been removed, cover the holes with adhesive tape. N
The remote control
The remote control doesn’t work. Check the batteries are inserted correctly. :
Replace the batteries if they are worn.
All components are required to service the system. If service is ever necessary, bring the entire system.
Maintenance