Triax Digital Satellite Receiver SR 110 - Manual (Page 14)

Turn the F-connector onto the peeled-back wire mesh, until the connector comes up against
the inner insulation. There must be no wire mesh overlapping at the back of the connector
end.
Shorten the inner core with wire-cutting pliers, so that it protrudes a maximum of 1 mm out of
the connector.
Screw the F-connector of the coaxial cable onto the “LNB IN” aerial connection on the
receiver. The other end of the coaxial cable should be firmly screwed onto the LNB.
Connecting Other Devices
TV
Plug the SCART cable into the “TV” SCART socket on the receiver. Connect the SCART cable to
the TV set. Follow the operating instructions of the TV set.
Video
Plug a SCART cable into the “VCR” SCART socket on the receiver. Connect the SCART cable to
the video recorder. Follow the operating instructions of the video recorder.
14