Triax Digital Satellite Receiver SR 110 - Manual (Page 35)

Technical Data
Receiver
Input frequency range 950 MHz ~ 2150 MHz
LNB power supply 13/18 V, 0.30 A max. Overload protection
IF Band width 55 MHz/8MHz (below 5MS/s)
LNB control 22 KHz +/- 2KHz, 0,6 V pp +/- 0,2 V
DiSEqC control Version 1.0, version 1.2, Tone-Burst A/B
Symbol rate 1 ~ 35 MS/s
Bit rate 115200 Bit/s
Input speed Max. 15 Mbit/s
Error correction 1/2, 2/3, 3/4, 5/6, 7/8, auto
Video MPEG-2 MP@ML
Audio MPEG – 1/2 audio Layer I and Layer II
Aspect ratio 4:3 Letterbox, 4:3 PanScan, 16:9
Video resolution 720 x 576 (Pal), 720 x 480 (NTSC)
Audio mode Left, Right, Stereo, AC3 digital sound
Options of connection
LNB F input Type F, IEC 169-24
TV SCART (output only) Video CVBS, Audio L, R
VCR SCART (output and input) Video CVBS, Audio L, R
RCA (CINCH) Audio L, R
SPDIF, coaxial Digital audio output
Power supply
Mains input voltage 100-240 V~, 50/60 Hz
Power consumption Ca. 10 W (operation with single LNB)
Ca. 2 W ( standby)
Physical specification
Dimensions in mm (W x D x H) 280 x 157 x 44
Weight in grams, approx. Receiver 1100 g. Remote control unit 80 g (less batteries)
Operating temperature 0°C~ +40° C
Storage temperature -40° C ~ + 65° C
35