Tascam DA-78HR - Manual (Page 24)

4 - Menu interface, etc.
TASCAM DA-78HR
24
4.6 AUDIO2 menu
Audio. 2. --
This menu provides addi-
tional audio parameter settings:
4.7 TC menu
TC --
The following parameters are used to
control timecode operations:
REC. MUTE.
(rec mute)
ALL OFF. *, ALL
ON or individual
tracks ON or OFF
7.10, “REC MUTE
(recording silence)”
Rec mute function
Display
Values
(*=default)
Described in
C. FADE.
(crossfade)
10 * through 200
(in 10 ms incre-
ments)
7.5, “Crossfade
times”
Crossfade time for punch, etc.
Out. Patch
(output patching)
Normal * (nor-
mal or as set)
7.12.2, “Output
patchbay”
Output patchbay
out. bit.
(output word
length)
16 , 24 * 7.12.1, “Output
word length”
(word length of digital output)
ShTL. MoN.
(shuttle monitor)
0 (off)*, 1 (on) 6.3, “Shuttle moni-
tor”
Shuttle monitor function
ShTL. MuT.
(shuttle mute)
0 (off)*, 1 (on) 6.4, “Shuttle mut-
ing”
Shuttle mute function
OSC.
(oscillator)
OFF *, 440 , 1k
(1k)
7.9, “Sine oscilla-
tor”
Line-up oscillator
Display
Values
(*=default)
Described in
Display
Values
(*=default)
Described in
TAPE. TC
(tape TC)
TC TRK * (TC
track), CONV
(converted), ABS
(absolute)
9.2, “Tape time-
code mode”
Tape timecode source
FRm mode
(frame mode)
SYS* (SYS), EXT
(EXTERNAL),
TAPE (TAPE):
29DF *, 30ND ,
29ND , 25 , 24 ,
30DF
9.3, “Selecting the
frame mode”,
9.4.1, “Showing
input timecode”,
9.5.8, “Checking
the frame mode of
striped timecode”
System frame mode and external/tape frame rate display
DISP.
(TC display)
TAPE * (off-tape),
EXT (external),
diff (difference)
9.4.1, “Showing
input timecode”
Timecode display source
In. TC. TMG
(input TC timing)
ANALOG *,
DIGITAL
9.4.2, “Timecode
input timing”
Incoming timecode reference
OUT. TC. TMG
(output TC timing)
ANALOG * (ana-
log), DIGITAL
(digital)
9.4.6, “Timecode
output timing”
Outgoing timecode reference
OUT. TC. SRC
(output TC
source)
TAPE tc * (from
tape), REGEN
(regenerated),
RESHAPE
(reshaped)
9.4.3, “Timecode
output”
Source of outgoing timecode
FAST lTC
(fast LTC)
5 FRm * (5
frames), LEAP
(leap), OFF
9.4.5, “Fast linear
timecode (LTC)
output”
Fast LTC output mode