TANDBERG 8000 MXP User Manual

Page 31

Advertising
background image

Installation

17


5. Screen Settings

When using wide screen (16:9) monitors, set TV Monitor Format to Wide (16:9).
TANDBERG also recommends setting Picture Layout to Picture outside Picture when
using 16:9 monitors. Picture outside Picture provides a display layout optimized for
wide screen monitors. The display layout may be changed at any time using the
Layout button on the remote control.


6. Software Options

To activate options for the system, a new option key must be entered in the Software
Options menu (see paperwork accompanying the system). The Presenter option key
should be entered under “New Option Key”. Any bandwidth option key should be
entered under “New Bandwidth Key”. For more information on these options, please
contact your TANDBERG representative.

7. Date and Time Settings

Select your preferred Date and Time Settings.

8. Save changes

Remember to save any changes made in a menu by selecting the Save button on the
menu line and pressing OK.




Network configuration:

1. Open the Network menu

Press OK/Menu to open the Main Menu, if not already displayed. Select Control
Panel - Administrator Settings - Network to open the Network menu.


2. ISDN configuration

Set the Network type to the desired network. Specify the settings for the selected
network in the relevant menu. Enabled but unused ISDN lines (i.e. lines not active)
should be disabled. For details, follow the instructions in

ISDN /External/Leased

E1/T1

. See also the examples in

Appendix 9: Connecting the system to the Switched

56 network

and in

Appendix 10: Connecting the system to ISDN using NT1 network

adapters

.


3. LAN configuration

Select LAN Settings in the Network menu and specify the necessary LAN settings
according to the instructions from your LAN administrator. For details, follow the
instructions in

LAN Settings

. If there is an H.323 Gatekeeper present on your LAN,

refer to

H.323 Settings

as well.

Advertising