Toshiba Eagle T1 Series PLCs - Manual

In Touch With Tomorrow TOSHIBA INTERNATIONAL CORPORATION
13131 West Little York Road
Houston, TX 77041
PH. 800 231- 1412, 713-466-0277 FAX 713-466-8773
Programmable Controllers E- Mail [email protected]
PRODUCT INFORMATION
October 2002
More Analog Inputs for T1 µPLCs
Toshiba Houston offers the Eagle analog I/O for the T1 Series
µ
PLCs. The Eagle I/O is universal
analog I/O. Eagle I/O allows T1 PLCs to work with the following analog signals.
For the analog inputs, the Eagle I/O performs the A to D (analog to digital) conversion and loads a
digital value directly into a T1 register. For analog outputs, the Eagle I/O reads a digital value out
of a T1 register and performs a D to A (digital to analog conversion). Analog signal types and
PLC registers are defined using the included simple setup software.
Simple process control has never been easier or more cost effective. Now the analog values
of temperature, pressure, flow, weight, etc. can be included into the sequencing, interlocking and
permissive control performed by the PLC.
For more information contact your nearest Toshiba programmable controller distributor, or visit the Toshiba Houston
Industrial website,
www.tic.toshiba.com.
Analog Inputs Analog Outputs
♦
Thermocouples ♦ 0-20 mA
♦
4-20 mA
♦
RTDs ♦ 4-20 mA
♦
0-100 mV
♦
0-50 mV ♦ 0-100 mV
♦
0-10 Vdc
Eagle 0201
2 Analog Inputs
1 Analog Output Eagle 0404
4 Analog Inputs
4 Analog Output
Eagle 0800
8 Analog
Inputs
Also
Available