Cable specifications, Technical specifications, Fiber cable – Transition Networks SSETF10XX-200 User Manual
Page 3: Copper cable
[email protected] -- Select the “Transition Now” Link for a Live Web Chat
5
CABLE SPECIFICATIONS
The physical characteristics must meet or exceed IEEE 802.3™ specifications.
Fiber Cable
Bit Error Rate:
<10-9
Multimode fiber (recommended):
62.5/125 µm
Multimode fiber (optional):
100/140, 85/140, 50/125 µm
Wavelength:
850 nm mulitmode
Attenuation:
<3.75 dB/km @ 850 nm
SSETF1011-200, SSETF1013-200
Fiber Transmitter Power:
min: -16.0 dBm
max: -10.0 dBm
Fiber Receiver Sensitivity (10Base-T):
min: -32.5 dBm
max: -7.2 dBm
Fiber Receiver Sensitivity (100Base-TX): min: -24.0 dBm
max: -7.2 dBm
Link Budget:
13.5 dB
Copper Cable
Category 5:
Gauge:
24 to 22 AWG
Attenuation:
22.0 dB /100m @ 100 MHz
Maximum Cable Distance:
100 meters
• Straight-Through OR Crossover cable may be used.
• Shielded Twisted-Pair (STP) OR Unshielded Twisted-Pair (UTP) may be used.
• Pins 1&2 and 3&6 are the two active pairs in an Ethernet™ network .
• RJ-45 Pin-out: Pin 1 = TD+, Pin 2 = TD-, Pin 3 = RD+, Pin 6 = RD-
• Use only dedicated wire pairs for the active pins:
(e.g., blue/white & white/blue, orange/white & white/orange, etc.)
• Do not use flat or silver satin wire.
Crossover Cable
1
2
3
6
Straight-Through Cable
Twisted Pair #1
Twisted Pair #1
Twisted Pair #2
Twisted Pair #2
1
2
3
6
1
2
3
6
1
2
3
6
6
SSETF10xx-200
Tech Support: 800-260-1312 International: 952-941-7600 7am-6pm CST (GMT-6:00)
TECHNICAL SPECIFICATIONS
Standards:
IEEE 802.3™
Data Rate:
10 Mb/s, 100 Mb/s
Dimensions:
3.4" x 0.86" x 5.0" (86 mm x 22 mm x 127 mm)
Weight:
8 oz (227 g) (approximate)
Power Supply DC Output:
12VDC, 500 mA (minimum)
minimum output regulation: 5%
Connector: 2.1mm barrel, center pin positive
Environment:
Operating Temperature: 0° to 50°C (32° to 122°F)
Storage Temperature: -20° to 85°C (-4° to 185°F)
Humidity: 10-90%, non condensing
Altitude: 0-10,000 feet
Warranty:
Lifetime