Tyco Electronics 4200L - Manual (Page 22)

User Manual – Interactive Digital Signage
SW601176 Rev A - Page 22 of 45
Chapter 6 – Operation
Power
To turn the touchmonitor on or off, press the touchmonitor power button once.
To power on the Computer Module, press the touchmonitor power button once.
To power off the Computer Module and touchmonitor, press and hold the touchmonitor power
button for 4 seconds, or follow the Computer Module’s operating system’s normal power off
procedure.
A Power Status LED is provided that functions according to the following table:
TouchMonitor/Computer Module status LED status
OFF OFF
SLEEP BLINKING
ON ON
The system consumes low power when in SLEEP and OFF modes. For detailed power
consumption specifications, refer to Appendix C, Technical Specifications.
Touching the screen will bring the system out of SLEEP mode (similar to moving the mouse or
pressing a keyboard key).
To improve reliability and reduce wasteful power consumption, disconnect the AC power cable
when long periods of disuse are planned.
APR Touch Technology
Multiple touchmonitor functionality is not supported for these APR touchmonitors.
For full APR touch functionality, the input video image should be fully scaled to the display’s
native resolution.
Your APR Touchmonitor is factory-calibrated and will never need manual calibration.