Texas Instruments 8200IC - Manual (Page 28)

28
Menu System 3M™ Digital WallDisplay
© 3M 2003. All Rights Reserved.
Tools Sub-Menu
The Tools sub-menu provides access to the following settings and tools:
Onscreen Timer Allows you to set a timer and display it onscreen.
Language Selects which language to use for onscreen commands. (Default language is
English.) It cycles between English, German, Spanish, Italian, and French.
Auto Shutoff Will automatically turn off the 3M Digital WallDisplay within the time desired.
(Default time is 0 minutes.)
Auto Switch When an input source is lost or disconnected, Auto Switch automatically detects
and switches to the next available input source. When Auto Switch is disabled,
press the Input button on the remote control to select the next available input
source.
Usage/Hrs Displays and/or resets 3M Digital WallDisplay’s and lamp’s operating time, in
number of hours.
Audio Adjust Allows you to adjust the bass and treble.
To open the Tools sub-menu:
1. Open the menu system by pressing the remote control Menu button or any arrow on the Menu Keypad.
2. Select the Tools sub-menu by pressing the up or down arrows on the remote control Disk Pad or Menu
Keypad.
3. To open the Tools sub-menu, press the right arrow of the Disk Pad or Menu Keypad.
4. Scroll to the desired item and adjust as needed.
5. Close the menu system by pressing the Menu button or scrolling to Exit and selecting it with the right
arrow of the Menu Keypad.
To return to the main menu, select Main and press the left or right arrow of the Disk Pad or Menu Keypad.