Texas Instruments 8200IC - Manual (Page 6)

6
Introduction 3M™ Digital WallDisplay
© 3M 2003. All Rights Reserved.
Safety Precautions
• To reduce the risk of electric shock, do not disassemble this appliance. Request a qualified technician
when service or repair work is required. Incorrect reassembly can cause electric shock when the
appliance is subsequently used.
• Connect this appliance to a grounded outlet.
• Keep all ventilation openings free of any obstructions.
• The projection lamp contains mercury. Always dispose of this lamp in a proper manner according to
local regulations.
• Do not apply force to the projection arm. This may cause permanent damage to the unit or may cause
personal injury.
• Do not manually open or close the projection arm while the 3M Digital WallDisplay is in operation.
• The 3M Digital WallDisplay’s projection arm is motorized, and extends 42˝ (106 cm) from the instal-
lation while in use. Caution should be taken when operating or walking near the 3M Digital
WallDisplay. It is possible a tall person’s head or an upraised hand could come in contact with the pro-
jection arm.
• Do not place the product in direct sunlight, near heaters or heat radiating appliances.