Topcom ORBIT - Manual (Page 24)

24
Factory Reset
8.6 Ring Priority
If you have more then one handset registered, you can choose which handset should ring
first before the others starts to ring. You can also set the amount of rings (2,4 or 6) after
the others start to ring.
8.7 First ring On/Off
If you have Caller ID service, your phone will not ring until the caller information has been
received. You can make your handsets to ring without waiting for the caller information
by turning the first ring On:
9 Factory Reset
You can restore your phone back to default (original) settings. This doesn’t effect the
phonebook, call list, user data or registrations of handsets.
1 Enter the menu.
2 Select “Settings”.
3 Select “Set Base”.
4 Select “Ring Priority”.
5 Select “All Handset” or “Select Handset”.
If “Select Handset” is selected:
6 Select the handset that should ring first.
7 Set the ring delay to 2, 4 or 6 rings and confirm.
8 Return to standby.
1 Enter the menu.
2 Select “Settings”.
3 Select “Set Base”.
4 Select “First Ring”.
5 Select “On” or “Off” and confirm.
6 Return to standby.
When turning On the first ring you will hear the default ring tone first. This
will change to the selected ring tone ones the caller information is displayed.
1 Enter the menu.
2 Select “Settings”.
3 Select “Set Base”.
4 Select “Master Reset”.
5 Select “Yes” to confirm or “No” to cancel.
6 Return to standby.