Tripp Lite B020-016-17 - Manual (Page 24)

24
8. Firmware Upgrade Utility
(Continued)
8.3 Upgrade Succeeded
8.4 Upgrade Failed
After the upgrade has completed, a screen appears to inform you that the procedure was successful:
If the upgrade failed to complete successfully, a dialog box appears asking if you want to retry. Click Yes
to retry. If you click No, the Upgrade Failed screen appears:
Click Cancel to close the Firmware Upgrade Utility. See the next section, Firmware Upgrade Recovery, for
how to proceed.
Click Finish to close the Firmware Upgrade Utility.