Teledyne LLD - Manual (Page 9)

Model LLG & LLD Pool and Spa Heater Page 9
Figure 8. Field Wiring Connections (LLD).
Figure 9. Time Clock Wiring.
Figure 10. Piping installation.
Figure 11. Plastic piping connections.
To connect a 3-wire remote (not supplied by
Teledyne Laars), order a wire harness assembly (part
No. E0120000) which connects to the flex-temp
control panel. Installation instructions are included
with the wire harness assembly.
Consult with Teledyne Laars Service Department
with questions about installing remotes other than
Teledyne Laars.
2G. Water Flow System
2G-1. Flange Installation
The heater has 2" universal header couplings.
You can connect threaded 2" iron pipe, unthreaded
1-1/2" iron pipe, 1-1/2" or 2" copper pipe without an
adapter (see Figure 10).
Plastic piping (PVC Schedule 40) can be con-
nected to the heater if local codes allow it, by using the
CPVC nipples included with your heater.