TP-Link TD-8841 - Manual (Page 24)

TD-8841 External ADSL2+ Router User Guide
20
¾ Type the Dial-up phone number, the User name and password supplied by your ISP in the
new page, if you have forgotten an existing user name or password, please connect with your
ISP. Click Create to create the dial-up connection.
¾ Click Close to finish the setup.
¾ To connect to the Internet next time, click the Start button, click Connect to, and then click
the connection you just created.
3.5 USB Configuration
If you use the USB interface, First of all you must install the USB’s drive to the using computer.
You can obtain the drives from the provided CD or download from our website.
( http://www.tp-link.com )
USB Drive installation procedures
If the hardware is installed before the computer is Power On. Please turn on the computer and
enter into the windows operating system, Then the operating system will identify the device. If the
hardware is installed after the computer is Power On, the desktop will display the information of
found the new hardware.
Then you will see the Figure 3-24 require install software for USB Device, select ‘Install from a list
or specific location (Advanced)’and click the next button to enter the next step. You will see the
Figure 3-25.
Figure 3-24