TP-Link TD-8841 - Manual (Page 33)

TD-8841 External ADSL2+ Router User Guide
29
Appendix B: Configuring the PCs
In this section, we’ll introduce how to install and configure the TCP/IP correctly in Windows
2000/XP. First make sure your Ethernet Adapter is working, refer to the adapter’s manual if
needed.
1. Install TCP/IP component
1) Right-press Network Neighbor and Choose Properties.
2) Right click the icon that showed below, select Properties on the prompt page.
Figure B-1
3) In the prompt page that showed below, double click on the Internet Protocol (TCP/IP).