Technicolor - Thomson DRD302RA - Manual (Page 42)

Connections
40
Connection A
Best Picture and Sound Quality
To use this connection you must have:
• TV with separate RF, audio/video, and S-Video inputs (jacks)
• VCR with RF and audio/video inputs
• Coaxial, audio/video, and S-Video cables
To connect TV, VCR and antenna or cable box.
1. Connect coaxial cables as shown.
2. Connect audio/video cables as shown.
3. Connect S-Video cable as shown.
To receive DSS ® programming:
1. Tune TV to receive the S-Video output from the DSS ®
receiver.
2. Tune DSS ® receiver to desired channel.
To receive off-air programming (no cable box):
1. Turn off VCR and DSS ® receiver.
2. Tune TV to desired channel.
To receive off-air programming (with cable box):
1. Turn off VCR and DSS ® receiver.
2. Tune TV to cable box output channel (usually CH2, CH3,
or CH4).
3. Tune cable box to desired channel.
To record DSS ® programming:
1. Tune TV to receive S-Video output from DSS ® receiver.
2. Tune DSS ® receiver to desired channel.
3. Set your VCR to record on line input.
To view VCR programming:
1. Tune TV to VCR output channel (usually CH3 or CH4).
VIDEO
DSS
RECEIVER
VCR IN FROM ANT
OUT TO TV
L R
S-VIDEO
S-VIDEO
VIDEO AUDIO
L R
SATELLITE IN
AUDIO
L
IN
R
L R
VIDEO
AUDIO
AUDIO IN VIDEO IN
SATELLITE
DISH
CH3
CH4
TV
OUT TO TV
IN FROM ANT
CABLE
OR
OFF-AIR ANTENNA
CH4
CH3
AUDIO OUT VIDEO OUT
CAUTION
Do not stack electronic components
or other objects on top of the DSS
®
receiver. See Safety Information,
inside front cover.