Front panel controls, Back panel, Reference – Technicolor - Thomson DRD302RA User Manual

Page 50: On/off turns the dss, System. out to tv use to connect the dss, Receiver. the dss, Receiver from another room

Advertising
background image

Reference

48

The Access Card door slides open so that you can replace the card when necessary.

Front Panel Controls

ON/OFF

DISPLAY

ANTENNA

MENU

SELECT

ON/OFF Turns the DSS

®

receiver’s power on or off.

DISPLAY Brings up the on-screen channel marker.

ANTENNA Switches the source of the video signal from DSS

®

satellite signals to an off-air antenna or cable

signal.

ARROWS Press the navigation arrows to move the on-screen highlight up, down, left, or right. Using the
arrows to highlight a menu item is also called “pointing.”

MENU•SELECT Brings up the Main menu. If you are already in the menu system, press MENU•SELECT to
select a highlighted choice.

ACCESS CARD Identifies you to your program providers. The DSS

®

system requires a valid access card.

IN FROM ANT Use to connect an off-air antenna or cable TV signal to the DSS

®

system.

OUT TO TV Use to connect the DSS

®

receiver to your TV. However, if your TV has audio/video jacks, you

should use those jacks to get better picture and sound quality.

CH3/CH4 SWITCH If a coaxial cable is used to connect the DSS

®

receiver to your TV, you must set the CH3/CH4

SWITCH. For example, to see the DSS

®

signal on TV channel 3, set the switch to 3.

S-VIDEO Provides the best picture quality. If your TV has S-VIDEO capability, use this jack along with the
audio/video jacks to connect the DSS

®

receiver to your TV.

VIDEO Provides better picture quality than the OUT TO TV jack. If your TV has audio/video capability, use this
jack to connect the DSS

®

receiver to your TV. You must also connect the AUDIO jacks.

AUDIO (R and L) Provide better sound quality than the OUT TO TV jack. If your TV has audio/video capability,
use these jacks to connect the DSS

®

receiver to your TV. You must also connect the VIDEO jack.

WIDE BAND DATA PORTS This port allows you to connect the DSS

®

system to future services and accessories as

they become available. A shielded cable and additional hardware may be required.

SATELLITE IN Use to connect the DSS

®

receiver to the satellite dish.

PHONE JACK Use to connect a phone line to the DSS

®

receiver. The DSS

®

system requires a phone line

connection to periodically call out to program providers.

REMOTE IN Use in conjunction with a remote control signal extender to control the DSS

®

receiver from

another room.

OUT

TO
TV

IN

FROM

ANT

S-VIDEO

VIDEO

R

L

AUDIO

WIDE BAND DATA

REMOTE IN

SATELLITE IN

PHONE JACK

CH 4

CH 3

Back Panel

Advertising