Targus Targus - Manual (Page 7)

7
3 Click Next.
The Install Hardware Device Drivers screen appears.
4 Select “Search for a suitable driver from my device (recommended)” and click Next.
If you are running the Windows
® XP operating system, select “Install from a list or specific
location (Advanced)” and enter C:\cardbus, or click Browse and locate the CardBus folder, and
skip to step 6.
The Locate Driver Files screen appears.
5 Select “Specify a location” and enter C:\cardbus or click Browse and locate the CardBus folder.
6 Click OK.
The Driver Files Search Results screen appears.
7 Click Next.
8 If the Digital Signature Not Found dialogue box appears, click either Yes or Continue anyway to
continue.
9 Click Finish to complete the driver installation.
You are now ready to begin using your external drive with the Cardbus card cable and enhanced
performance driver.
Using the External Drive
Inserting and Removing a Disc
1 Turn on your computer and press the eject button to open the tray.
2 To insert a disc, hold it by the edges and place it in the tray with the readable (plain) side down.
If you are using a high capacity disc, place the side of the disc you want the drive to read facing
down. Then, gently press down on the disc until it snaps into place.
3 To remove a disc, grasp it by the edges and gently pull up until the disc is released.
CAUTION: Avoid touching the readable (plain) side(s) of a disc. Touching the readable side of the disc
may cause read errors, poor performance or failed operation.
ComboDrive.book Page 7 Thursday, October 10, 2002 1:15 PM