Texas Instruments 3000 MCU - Manual (Page 23)

SpectraLink Corporation T1 Remote Module Installation
Link WTS – Link 3000 MCU
5.2 Master Clock Configuration
If the T1 facilities are Network Clocked, one shelf must be designated as the Master
Clock Source.
1. From the Operator’s Console, select F8, Configuration Display and
Administration . The following screen displays.
2. Select Field 12. Master Clock Cabinet .
3. Enter the shelf number of the Master Clock shelf.
4. Select
SAVE to save the information.
5.3 Test System
The system should now be tested to ensure that it is functioning correctly. See Test
System in the Link WTS – Link 3000 MCU: Installation manual for more information.
Part Number: 72-0059-06-E.doc Page 23