2 connecting a computer using ethernet, Requirements, Procedure – Technicolor - Thomson TG787 User Manual
Page 28: Connecting a computer using ethernet
Advertising
E-DOC-CTC-20080118-0051 v2.0
22
3
Adding New Devices to your Network
3.1.2
Connecting a computer using Ethernet
Requirements
Your computer must have a free Ethernet port.
Your computer must be configured to obtain an IP address automatically. This is the default setting.
Procedure
Proceed as follows:
1
Connect one end of the (yellow) Ethernet cable to (one of the) yellow Ethernet port(s) of your Thomson
Gateway:
2
Connect the other end of the (yellow) Ethernet cable to your computer.
3
Your computer is now connected to your network. No additional configuration is needed.
Advertising