TAG DVD32FIR - Manual (Page 26)

technical data
|
51
video outputs
s-video and composite video outputs
supported output PAL-B/D/G/H/I
television standards PAL M
NTSC-M
output levels
composite 1 V p-p (75 ohm load, negative sync.)
Y-signal: 1 Vp-p (75 ohm load, negative sync.)
S-video C-signal: PAL: 300 mVp-p (75 ohm load)
NTSC:286 mVp-p (75 ohm load)
component video Y-signal: 1 Vp-p (75 ohm load, 300 mV sync.)
outputs Pb(B-Y)-signal: 700 mVp-p (75 ohm load)
Pr(R-Y)-signal: 700 mVp-p (75 ohm load)
power requirements 100/115/230 V AC 50/60 Hz by model variant
power consumption operating: 35 w (typical)
standby: less than 5 w (typical)
50
|
technical data
This section is for those of you who really want to know the ‘insides’ of your DVD32FLR. You
will not miss out on any of the functions or performance of your DVD32FLR if you choose not
to read any further.
laser type dual semiconductor laser
DVD-Video
playable disc types CD
CD-R
digital audio outputs
supported output Linear PCM
formats Dolby Digital
DTS
sample rates 44.1, 48.0 and 96.0 kHz
word lengths 16, 20 and 24 bit
IEC958 output level 0.5 V p-p into 75 ohm load
TOSLINKTM output -18 dBm (wavelength 660 nm)
level
GRR00868.01-DVD32RFLR UM 5/30/02 12:26 PM Page 50