TAG DVD32FIR User Manual
Page 8
heading
|
15
controlling the DVD32FLR
|
15
14
|
controlling the DVD32FLR
Your DVD32FLR is supplied with a backlit system-remote
(2)
, suitable
for controlling all the main functions of your complete home cinema,
for day to day operation. For more details see the following pages.
The backlit system-remote is designed to
control your complete home cinema system.
The system-remote comes preprogrammed
and ready to use for many TAG McLaren
Audio products, including the TAG
McLaren av processor AV32R, five-channel
amplifier 100x5R, three-channel amplifier
250x3R and your DVD player DVD32FLR.
Other devices which are not
preprogrammed to work with the system-
remote will need to be ‘learnt’. To program
the system-remote for other devices, you
will need the original remote control for the
unit you wish to control. Details of how to
program the system-remote are included at
the end of this manual.
The DVD32FLR has a standby mode which can be entered by
pressing standby either on the front panel or Remote
(1)
. The blue
power LED will be dimmed and the display switched off. Normal
operation may be resumed by pressing any button on the front
panel or Remote. You can keep the DVD32FLR in standby for long
periods of time without penalty of a high electricity bill, as the
DVD32FLR includes its own low-current standby transformer and
circuitry.
remote control
inserting batteries
Before using the remote for the first time, you will need to insert the
batteries supplied (be sure to insert the batteries with the polarity as
indicated). For optimum operation you should point the Remote
towards your DVD32FLR when using it. The red Remote active LED on
the front panel flashes when commands are received from the Remote.
system-remote
controlling the DVD32FLR
Before you can control the DVD32FLR with
the system-remote you must first select DVD
as the device to control. This is done by
pressing the dvd key in the REMOTE
SELECTION area at the top of the system-
remote. The DVD32FLR will remain selected
by the Remote until another unit is chosen
via the REMOTE SELECTION area. Once the
DVD32FLR has been selected, it can be
controlled from the system-remote. A red
light on the front panel of the DVD32FLR
will flash when commands from the system-
remote are received, and the ‘DVD’ key in
the REMOTE SELECTION area will light
briefly with each key press.
standby
1. The player enters standby automatically when power is applied
2. The system-remote is identical to the one shipped with the TAG McLaren av processor AV32R
cd
dvd
amp
vcr
ld
tv
sat
av
pause
r
e
w
f
f
d
play
skip
+
record
skip
eject
surround
1
2
3
normal
4
5
6
display
7
8
9
tape
10
0
THX
m1
m2
m3
m4
light
---
stop
R E M O T E S E L E C T I O N
ok
return
cancel
time
subtitle
audio
angle
cd
vcr
tv
ld
sat
dvd
tuner
md
aux
dab
+
+
---
---
standby
mute
menu
V O L
C H
LFE
LFE
---
def
abc
space
ghi
jkl
mno
+/–
pqrs
tuv
wxyz
shift
+
system-remote
GRR00868.01-DVD32RFLR UM 5/30/02 12:25 PM Page 14