Thermador HSW - Manual (Page 14)

Page 6
C. Level the appliance, using a
carpenters level across bottom of
hood with leveling screws in
mounting hooks or rectangular
cutouts.
D. Secure hood with 2 screws on top
and 2 screws on bottom. See Fig.
D.
E. Connect ducting (Fig. C).
Note: for blower serviceability,
leave a gap of 1" minimum
between top of transition and
sheet metal duct and cover gap
with a starting collar wrapped
around duct and transition.
Locate collar screws so they fit
into corner of duct cover. Secure
collar to transition and duct with
three sheet metal screws
each. Seal with duct tape.
Appliance Installation:
A. Install transition on top of hood if
removed for shipping. Fig. C
B. Hang hood on 2 mounting hooks
through the rectangular cutouts
on back of hood. Fig. D