Topcom 4011C SIM User Manual

Page 26

Advertising
background image

26

Topcom Butler 4011/4011C Sim

Topcom Butler 4011/4011C Sim

e.g. Press the number key 2, 3 and 5. On the display, this will appear: HS _2 3_5 01486
These handsets can no longer dial numbers beginning with ‘01486’.

Press the Programming key

to confirm your selection. Repeat the same procedure

described above if you would like to bar other numbers (max. 5)!

4.28 Direct Call

By setting a Direct Call number, the phone will automatically take the line and dial out this
number. This function is useful to use the phone as a emergency phone.

4.28.1 To program the Direct Call number

Press the Programming key

Press the Up or Down key

until ‘DIRECT’ appears on the display

Press the Programming key

If necessary, delete the existing number by pressing the Delete-key a few times

Enter the direct number

Press the Programming key

4.28.2 Turn the Direct Call function ON/OFF
To turn it ON:

Press the Programming key

Press the Up or Down key

until ‘DIRECT’ appears on the display

Press the mute-key for 2s

‘DIRECT ON’ appears on the display

To turn if OFF:

Quick press the Programming key

twice

4.29 Default settings (reset) of the parameters

You can reset the standard (default) settings in the telephone. You need the PIN code to do
this.
The default settings are:
Keypad:

not locked

Key clicks:

active

Speaker volume:

level

Ringer melody:

1

Ringer volume :

5

Selection base unit:

automatic

Flash time:

100ms

To restore the default settings, do the following:

Press the Programming key

.

Press the Up or Down key

repeatedly until ‘SETTING’ appears on the display.

Press the Programming key

.

Press the Up or Down key

repeatedly until ‘RESET’ appears on the display.

Press the Programming key

.

Advertising
This manual is related to the following products: