Tektronix PHASER 780 - Manual (Page 21)

19
Tektronix Image Transfer Media
1 Make sure that your document size is set up as Tabloid
(11 x 17 in.).
2 Load the image transfer sheet into the multi-purpose tray with
the short edge inserted into the printer. Load with the
blank
side up. Insert only one sheet at a time.
3 Adjust the paper guide.
4 At the printer’s front panel:
a Wait until the Multi-Purpose Tray Media
Size message is displayed. Press until
Tabloid is displayed. Press Select to continue.
b When the Multi-Purpose Tray Media Type
prompt appears, press until Fabric
Transfer is displayed. Press Select .
5 From your application’s Print menu, select Multi-Purpose
Tray . Click Print .
6 To transfer the image, follow the instructions provided with
the Tektronix media.
Capacity: 1 sheet
Feed image transfer media one sheet at a time to
prevent jamming.
3040-49