Topcom Xplorer 871 - Manual (Page 24)

XPLORER 871 24
2. USING THE ADSL MODEM
2.1 THE TOP LEDS
2.2 THE REAR PORTS
LED Meaning
1 SYS Flashes when the router is working properly.
2 ADSL RXD Flashes when receiving data.
3 ADSL TXD Flashes when transmitting data.
4 ADSL SYN Lit green when ADSL physical layer is connected.
5 LAN LNK Lit green when the LAN link is up.
6 LAN ACT Flashes when there is activity on the LAN port.
7 PWR Lit green when power adapter is connected.
Power (jack) Connect the supplied power adapter to this jack.
USB (USB connector) Connect the supplied USB cable to this port when connecting to the PC.
LAN (RJ-45 connector) Connect the supplied crossover cable to this port when connecting to a NIC
(Network Interface card) in PC. Connect an UTP Ethernet cable to this port
when connecting to a LAN such as an office or home network.
LINE (RJ-11 connector) Connect the supplied RJ-11 cable to this port when connecting to the ADSL.
1 2 3 4 5 6 7
Power USB LAN LINE
Xpl871.book Page 24 Friday, November 15, 2002 12:08 PM