Topcom Xplorer 871 User Manual
Page 25
XPLORER 871
25
2.3 CABLING
Through Ethernet Port
The product’s LAN port is wired just like a Network Adapter’s port. From the product directly to a PC, the
cable should be an Ethernet crossover cable.
Through USB Port
The product can be used as a Network Adapter on your PC. That means you do not have to install a network
adapter first on your PC before connecting the ADSL Modem. Just connect the supplied USB cable to the
USB port of the ADSL Modem and connect the other end to the PC.
Make sure that your ADSL Modem and PC are turned on. On the front of the product is a bank of LEDs. As
a first check, please verify that the PWR, LAN LNK and ADSL SYN LEDs are lit.
2.4 LINE CONNECTION (ONLY FOR SWEDEN)
Xpl871.book Page 25 Friday, November 15, 2002 12:08 PM