Electrical requirements – TOA Electronics ARENA TS300 User Manual

Page 4

Advertising
background image

ELECTRICAL REQUIREMENTS

Check that the voltage rating displayed on the rear panel is correct for your area before
connecting. If it is incorrect, DO NOT CONNECT THE MAINS LEAD TO THE MAINS
SUPPLY. Seek assistance from your dealer or a qualified electrician or instructed person.

EUROPEAN MODELS

A mains cable is supplied with an IEC moulded socket at one end and a moulded mains
plug at the other end. Where the moulded plug is fitted with a mains fuse, always replace
with the same 5A rated fuse.

If the fitted plug is unsuitable for your type of outlet sockets, it should be cut off and
disposed of safely, in case it is inserted into a live socket elsewhere. The wires in the
mains cable are coloured in accordance with the following code:

GREEN AND YELLOW- EARTH
BLUE- NEUTRAL
BROWN- LIVE

AS THE COLOURS OF THE WIRES IN THE MAINS CABLE MAY NOT CORRESPOND
WITH THE COLOURED MARKINGS IDENTIFYING THE
TERMINALS IN YOUR PLUG, PROCEED AS FOLLOWS:

The wire which is coloured GREEN AND YELLOW must be connected to the
terminal in the plug which is marked either by the letter E, the earth safety
symbol, or coloured GREEN or GREEN and YELLOW.

The wire which is coloured BLUE must be connected to the terminal in the plug
which is marked by the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal in the
plug which is marked by the letter L or coloured RED.

Ensure that the terminals are tightened securely, and no loose strands of wire
are present.

Ensure cord grip is clamped over outer sheath of cable, rather than over the
wires.

FUSE PROTECTION

An additional mains fuse is provided in the IEC power inlet on the back of the subwoofer,
which can only be removed with the power cord unplugged, using a small screwdriver.
This must be replaced by a fuse of the same type and rating (see Specifications or refer
to rear panel).

WARRANTY

Please complete and return the enclosed warranty registration document - this does not
limit your legal rights. This equipment has been produced and tested with care and
precision. It is built to give first class service and carries a 1-year warranty. If the equipment
proves to be defective within this period for any reason other than accident, misuse,
unauthorised modification or fair wear and tear, Tannoy will repair any such defect or,
at our option, replace it without charge for parts, labour or return carriage. This warranty
is given in addition to the customer's statutory rights.

4

Advertising