TOA Electronics ARENA TS300 - Manual (Page 6)

SYSTEM SETUP GUIDE
Decide which orientation of the subwoofer suits your layout (see diagrams).
TS300 and TS500 subwoofers are unique in that they can be used in various orientations
depending on available space and desired visual effect. There are 3 choices of orientation:
Low Profile, Portrait, or Landscape.
Low Profile orientation:
Locate 4 spikes, 4 lock rings,
4 spike extenders and 4 floor
protectors in the accessory pack.
Assemble 4 spikes/lock rings/extenders
according to the diagram and screw
them into the threaded holes on the
bottom face of the cabinet as shown.
Place the subwoofer with the spikes facing downwards to contact the floor or
pierce the carpet.
Landscape or Portrait Profile orientation:
Locate 4 spikes, 4 lock rings and
4 floor protectors in the accessory pack.
Assemble 4 spikes/lock rings and screw
them into the set of threaded holes on
the correct face of the cabinet as shown
in the diagram, choosing between
landscape or portrait orientation as required.
Place the subwoofer with the spikes facing
downwards to contact the floor or pierce
the carpet.
The spikes are designed to pierce carpet
and underlay without damage, to make
contact with a structural floor surface
underneath - for polished wood floors
invert the spike and fit the rubber floor
protectors to the rounded end of the spike.
In all cases of orientation you must adjust the
height of the spikes to prevent the subwoofer
from rocking. It must be solidly connected
to the floor through the spikes.
When all is well, finally tighten the
locking nuts.
6