Crt adaptor – Texas Instruments TravelMate 2000 User Manual
Page 116
CRT Adaptor
4.
With the component side facing down, insert the CRT Adaptor into the slot. Be sure that
the connectors on the computer and on the lower side of the CRT Adaptor fully mate, and
then tighten the two screws on the CRT Adaptor.
5.
Close the option card slot cover by pushing down on both sides of the cover and replace
the template.
6.
Reinstall the battery, as described in Chapter 3. This completes the installation of the CRT
Adaptor. The external CRT connector can now be found on the left side of the computer.
Since you removed the battery during installation, the settings on the Set Up and Hardware Installation
screens may have changed. From the Set Up and Hardware Installation screens, enter appropriate values for
each category, as described in Chapter 4.
TravelMate 2000 Options 6-17