Texas Instruments TravelMate 2000 - Manual (Page 32)

Rear Panel
The rear panel of the computer has two connectors and an AC Adaptor jack.
Expansion Bus Connector
The optional Floppy Drive Unit or the optional Expansion Unit plugs into the expansion bus connector on the
rear of the TravelMate 2000. For details, see Chapter 6.
Add-On Battery Pack Connector
The optional Add-On Battery Pack plugs into the Battery pack connector. For details, see Chapter 6.
Note: Dust caps are provided for the expansion bus connector and Battery pack connector. Remove the
caps and store them in the undersides of the options while the connectors are in use, and replace the caps
when the connectors are not in use.
More About Hardware 2-9