Tekkeon MP3450 R2 - Manual (Page 4)

3 USER GUIDE
Getting to Know myPower ALL Plus
Storing myPower ALL Plus
Lithium polymer batteries must be used consistently for maximum performance. Therefore, if you do not
use the battery often, once a month you should discharge and recharge the battery to 40% (if it will be
transported) or 70% (for long term storage), and store it in a cool and dry environment at a temperature
between 50° and 86° F (10° and 30°C). You may permanently damage your battery’s capacity by storing
the battery without any capacity in the cell. It is important that you do not leave the battery in the interior
of a vehicle parked in the sun, or exposed to direct sunlight for extended periods of time.
Capacity Level Indicators
ON/OFF
Switch
DC OUT
for connection
to device
DC IN for connection to
power adapter
Charging/Indicator
MP3450 R2 MP3450-10
USB Port for connection
to 5V device
6-Pin Input Port
for connection to a solar panel or a second battery
Capacity Level
Button
Sunbooster Solar
Charging Port
Sunbooster Solar
Charging Port