Operation and functions, Tuning – Tangent TNR-50 User Manual
Page 16
15
OPERATION AND FUNCTIONS
+
AUTO TUNE
+
TUNE
PRESET
MEMO
FM
AM
ST/MO
RDS
POWER
TNR-50
- PRESET +
MEMORY
AUTOTUNE
FM/AM
ST/MONO
RESET
TUNING
Tuning
1
2
2
1
If you want to manual tune a channel, you must
press the tune + or - button on the remote control,
or turn the tuning knob on the front panel. For
every push on the button, the frequency will
change 0,05MHz on FM and 9 Khz on AM.
To store the manually tuned channel, simply press
the Memory button on the front panel or the Memo
button on the remote. The channel will then be
stored on the current preset.
1
2
When the unit is turned on for the first time, all settings will be default settings. The settings can be changed
according to your preference. When the unit is turned off the next time, these settings will naturally be saved
as the new default settings. This also applies if you unplug the unit.
When the unit has been turned on, channels must be
saved. This is done by means of the autotune
function.
To use the autotune function through the front
panel controls, press the AUTOTUNE button. All
available channels on the current tuner band will
be saved.
You can also press the AUTOTUNE button on the
remote control.
+
AUTO TUNE
+
TUNE
PRESET
MEMO
FM
AM
ST/MO
RDS
POWER
TNR-50
- PRESET +
MEMORY
AUTOTUNE
FM/AM
ST/MONO
RESET
TUNING
1
2
1
2