Tangent TNR-50 - Manual (Page 17)

16
OPERATION AND FUNCTIONS
This tuner can be reset. This is used to delete channel stored in the unit.
Press the RESET button on the front panel to reset the unit.
Reset
Stereo and Mono
Selecting presets
+
AUTO TUNE
+
TUNE PRESET
MEMO
FM AM ST/MO
RDS POWER
TNR-50
1
Channels that have been saved can be selected
either by means of the Preset + and Preset -
buttons on the remote control or on the front
panel.
- PRESET + MEMORY AUTOTUNE FM/AM ST/MONO RESET
TUNING
1
1
In some areas not all stations can be recieved
noise free, because it is not possible to get a
strong enough antenna signal.
In this case there will be a lot of noise on some
radio stations.
It is possible to reduce the noise quite a bit by
listening to the radio station in mono in stead of in
stereo. This can make the radio station acceptable
to listen to. Change to mono by pressing the
ST/MO button on the remote or the ST/MONO
button on the front panel. To change back to
stereo again, simply press the button once again. 1
+
AUTO TUNE
+
TUNE PRESET
MEMO
FM AM ST/MO
RDS POWER
TNR-50
1
- PRESET + MEMORY AUTOTUNE FM/AM ST/MONO RESET
TUNING
1