TOA Electronics 1000 Series - Manual (Page 12)

Specifications
Frequency Response
±1dB, 20Hz to 20kHz
Total Harmonic Distortion
Less than 0.01% at 1 kHz, all sliders at 0 position,
rated output
Equalization Center Frequencies
31.5Hz to 16kHz
31.5Hz, 40Hz, 50Hz, 63Hz, 80Hz, 100Hz, 125Hz,
160Hz, 200Hz, 250Hz, 315Hz, 400Hz, 500Hz, 630Hz,
4kHz, 5kHz, 6.3kHz, 8kHz, 10kHz, 12.5kHz, 16kHz
Rated Input Level
+ 4dB (INPUT LEVEL CONTROL set for 0 position)
Rated Output Level
+ 4dB with 600-ohm load
Maximum Input Level
+ 20dB at 1kHz
Maximum Output Level
+ 20dB with 600-ohm load
Input Impedance
10k ohms
Output Impedance
600 ohms
Hum and Noise
—94dB (EQ in, all sliders at 0 position, 20~20kHz
BPF)
Indicators
A red LED for output and input clipping, A green
LED for equalizer IN, A green LED for power ON, A
green LED for filter IN
Controls
Equalizer Sliders
±12dB
Input Level Control
±12dB
Highpass Filter
12dB per octave
Adjustable Cutoff Frequency:15Hz to 300Hz
Lowpass Filter
12dB per octave/6dB per octave
Adjustable Cutoff Frequency:2.5kHz to 30kHz
AC Line Voltage
AC mains, 50Hz/60Hz
Power Consumption
11 watts
Finish
Black
Dimensions
(W X H x D)483 x 88 x 317mm(19.0" x 3.5" x 12.5" )
Weight
4.5kg (9.9lbs.)
Note:0 dB is referenced to 0.775 volts RMS.
Specifications are subject to change without notice.
Accessories
Security cover
Screw for security cover
Short piece 1
2
2
Fuse
Warranty card (for USA and Canada)
Operating instructions
1
1
1
Appearance
mm(inch)
TOA Corporation
KOBE, JAPAN
Printed Japan
133-12-037-2A
— 12 —