The Singing Machine SMB-623 - Manual (Page 6)

5
PAUSE
The PLAYBACK can be stopped temporarily at any time by pressing PLAY/PAUSE button
(2) once. Press PLAY/PAUSE button (2) once more to resume playback.
FORWARD/REVERSE/SKIP
Press SKIP FORWARD button (17) to skip ahead to the beginning of the next track.
Press this button again for each additional track you want to skip.
Press SKIP BACKWARD button (18) to skip back to beginning of the current track.
Press this button again to the beginning of the previous track. 1.
2.
RANDOM/REPEAT
DISPLAY
In CD or RADIO mode, press the DISPLAY button (11), the display will shown the number of
current tracks and the current station.
The CD player can play “RANDOM”, “REP.”, “REP. ALL” and “RANDOM REP. ALL” by press
RANDOM/REPEAT button (15) repeatedly.
PROGRAM
Note: Pressing the SKIP / button (17)/(18) during programmed playback
will only skip through the tracks that have been programmed.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Press the POWER button (7).
Set the FUNCTION switch (1) to the CD position.
Lift up the CD door lid (6) in order to open the CD door (5).
Insert the CD, with the label facing upward.
Close the CD door (5). The total number of tracks on the CD will be shown on the display.
If the disc is inserted incorrectly, or if it is dirty or damaged, or if it is not a music CD, the
display will show “nocd”, and the player will stop.
Press the PROG. button (14). The “01 ” and “PROG ” icon will be shown on the display,
and will be blinking.
Press the SKIP / button (17)/(18) in order to choose the track that you would like to
play. Press the PROG. button (14) again in order to finish the programming for the first
track.
Repeat step “ 7 ” in order to program the other tracks. A maximum of 20 tracks can be
programmed.
To clear the program memory, press the STOP button (19).
Once you have finished programming, press the PLAY/PAUSE button (2). The tracks
will play in the programmed order, and the corresponding track number will be displayed.
You can move forward and backwards through the programmed tracks (see Forward/
Backward/SKIP), or temporary stop playback (see Pause). To stop playback, press the
STOP button (19).
The programming function is used to pre-set the order of the tracks to be played.