The Singing Machine SMB-623 - Manual (Page 7)

6
AUX IN
You can connect an external audio player to this jack in order to use the playback function.
Note: When a device is connected to the AUX IN jack, the current source from the CD or
RADIO will be cut off automatically.
SETTING THE CLOCK TIME
2.
1.
3.
SETTING THE ALARM TIME
This appliance can be set to two ALARM times for CD or RADIO or BUZZER.
Set the FUNCTION switch (1) to the CD or RADIO or BUZZER position.
Press and hold the ALARM 1 or ALARM 2 button (10) or (9). The hour digit will begin to
flash.
Set the ALARM 1 and ALARM 2 time following the same procedure used to set the clock
time.
While CD track flashing, press / button to select your desired track for alarm wake-up
2.
1.
4.
3.
4.
Note:
The CLOCK uses the 12 HR format.
Press and hold the CLOCK button (16). The hour digit will begin to flash. Press the SKIP
/ button (17)/(18) in order to adjust the hour.
Press the CLOCK button (16) again, the minute digit will begin to flash. Press the SKIP
/ button (17)/(18) in order to adjust the minutes.
Press the CLOCK button (16) once more in order to confirm the clock setting.
To cancel the ALARM for next day, press the ALARM buttons until the “AL1” or “AL2”
icons disappear from the display.
SLEEP
TECHNICAL DETAILS:
REPEAT ALARM
When the buzzer sounds or your CD or Radio comes on, you can press the REPEAT ALARM
(5) to turn them off for 6 minutes. The alarm buzzer or radio or CD will then turn itself on
again. This function can be repeated for 60 minutes, it will then be silent until the next alarm
or until the CD/Radio On/Off button has been pressed (this means that your Alarm, Radio or
CD is set to wake you up the same time the following day).
5.
Power: AC 120 V ~ 60 Hz
Radio Frequency: AM: 540 - 1700 kHz
FM: 88 - 108 MHz
Speakers: 2 x 8 Ohm
Press the SLEEP button (13), the display will show “90” “80” “70” “10”. Select
the amount of time that you desire. The power will will be turned off when the selected
amount of time has elapsed.