Toshiba SR-C8002 - Manual (Page 19)

14/24 SR-C8002 Rev.1.0
6.2.2.Timing of Host Interface (PIO)
Figure 9 shows the Host Interface Timings
t1
t4
Address valid*1
DIOR-/DIOW-*1
Write data valid*1
t6 t7
Read data valid*1
IOCS16-*1
t8
IORDY
tRD
t6Z
t9
tA tB
t2i
t3
t5
t0
t2
*1: In all timing diagrams, the low line indicator negated, and the upper line
indicators asserted.
PIO timing parameters min (ns) max (ns) Min Time (ns) Max Time (ns)
t0 Cycle time 120
t1 Address valid to DIOR/DIOW-setup 25
t2 DIOR/DIOW-pulse wide 70
t2i DIOR/DIOW-recovery time 25
t3 DIOW-data setup 20
t4 DIOW-data hold 10
t5 DIOR-data setup 20
t6 DIOR-data hold 5
t6Z DIOR-data tristate 30
t7 Addr valid to IOCS 16-assertion 30
t8 Addr valid to IOCS 16-negation 30
t9 DIOR/DIOW-to address valid hold 10
tRD Read Data Valid to IORDY active 0
tA IORDY setup 35
tB IORDY pulse wide 1250
Figure 9 Host Interface Timing (PIO Mode4)