Toshiba 27HL95 - Manual (Page 71)

Chapter 8: Using the TV’s features
71 Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
(E) 27HL95 *Web 213 : 276
Using the StableSound ® feature
The StableSound ® feature limits the highest volume level to
prevent extreme changes in volume when the signal source
changes (for example, to prevent the sudden increase in volume
that often happens when a TV program switches to a
commercial).
To turn on the StableSound
® feature:
1. Press MENU and open the Audio menu.
2. Highlight Audio Settings and press ENTER.
Audio Settings
Advanced Audio Settings
Audio Setup
Audio
Navigate Select Exit EXIT Back RTN
3. Press z to highlight StableSound, and then press x • to
select On.
Done
Audio Settings
Bass 50
Treble
Reset
50
0 Balance
StableSound Off
4. To save the new settings, highlight Done and press
ENTER. To reset the settings to the factory defaults,
highlight Reset and press ENTER.
Note: The Reset function returns your audio adjustments to the
following factory settings:
Bass .................. center (50)
Treble ............... center (50)
Balance ............. center (0)
StableSound ...... Off
To turn off the StableSound feature:
Select Off in step 3 above.
Adjusting the audio
(continued)
Adjusting the audio quality
You can adjust the audio quality by adjusting the bass, treble,
and balance.
To adjust the audio quality:
1. Press MENU and open the Audio menu.
2. Highlight Audio Settings and press ENTER.
Audio Settings
Advanced Audio Settings
Audio Setup
Audio
Navigate Select Exit EXIT Back RTN
3. Press z to highlight the item you want to adjust (Bass,
Treble, or Balance).
Done
Audio Settings
Bass 50
Treble
Reset
50
0 Balance
StableSound Off
4. Press x • to adjust the level.
• x makes the bass or treble weaker or increases the balance
in the left channel (depending on the item selected).
• • makes the bass or treble stronger or increases the balance
in the right channel (depending on the item selected).
5. To save the new settings, highlight Done and press
ENTER. To reset the settings to the factory defaults,
highlight Reset and press ENTER.
#01E_065-072_27HL95 05.9.12, 15:46 71
Black