Therma-Tru Smooth-Star - Manual (Page 4)

3
NOTE:
A large work area is needed to assemble the frame kit. Cover area with
cardboard from one or more door panel cartons to protect frame parts
and floor.
Lay parts on floor and position sill, head,
and side jambs with exterior side up.
Side Jamb
Sill
Head Jamb
Side Jamb
Exterior
Frame Assembly
Engage groove in sill cap base with sill.
Rotate sill cap base down to snap into place.
Use a rubber mallet if necessary.
For units using the wide profile top-hung screens, install top-hung screen track and
adapter into head jamb prior to assembly.
Reference steps 1 thru 4 of the “Wide Profile” Screen Installation - Sliding Patio
instructions, included with the top-hung screen, for complete details.
LAY FRAME COMPONENTS ONTO WORK AREA
INSTALL SILL CAP BASE
IF APPLICABLE, INSTALL TOP-HUNG SCREEN
TRACK
1
3
2
Sill cap base