Topfield TF 5000 - Manual (Page 21)

2.5 Inserting batteries in the remote control 13
Connecting to the television by RF connector
Connect the RF LOOP 2 OUT socket and the RF IN socket
on the digital receiver with a RF cable, and then plug a RF
cable into the
RF OUT socket on the digital receiver and the
corresponding input socket on your television.
2.5 Inserting batteries in the remote control
To insert the batteries, open the battery compartment by re-
moving the lid, and then insert the batteries observing the po-
larity, which is marked on the base of the battery compart-
ment. Close the battery compartment after that.
If the digital receiver no longer reacts properly to remote con-
trol commands, the batteries may be flat. Be sure to remove
used batteries. The manufacturer accepts no liability for dam-
age resulting from leaking batteries.
NOTE Batteries, including those which contain no heavy met-
als, may not be disposed of with household waste.
Please dispose of used batteries in an environmentally
sound manner. Find out about the legal regulations
which apply in your area.