5 sound mode, 6 rf output, Sound mode – Topfield TF 5000 User Manual

Page 27: Rf output

Advertising
background image

3.2 Video and audio settings

19

You cannot enjoy well wide-screen programs with your normal-
screen television as the above figures show. The left figure
shows a normal picture displayed in the normal screen. To
watch wide-screen programs in the shape like the center fig-
ure, set the

16:9 Display Format

option to

Letter Box

; then,

wide-screen pictures will be reduced to fit to the width of the
normal screen. Otherwise to watch them in the shape like the
right figure, set the option to

Center extract

; then, wide-screen

pictures will be cut out on the left and right sides equally to fit
to the width of the normal screen.

3.2.5

Sound mode

Basically, there are two audio sources as you can find two au-
dio sockets on the back panel of the digital receiver. You can
enjoy only one source or both of them in either stereo or mono.
Set the

Sound Mode

option as you desire.

Apart from this setting, you can change the sound mode with

button when you watch a program. For detailed descrip-

tions about how to change the sound mode, refer to § 5.4.

3.2.6

RF output

If you have connected your television to the

RF OUT

socket,

you should configure the RF output. The digital receiver can
make an analog television from a digital television and output
it through the

RF OUT

socket.

Set the

RF Output

option to the television standard that your

country supports refering to Table 3.1.

Advertising