Therma-Stor Products Group UA-150H - Manual (Page 24)

INSTRUCTIONS FOR ASSEMBLING THE VIBRATION ISOLATORS TO THE 150H
1. Lift one end of the UA-150H at least 12” off the floor.
2. Slide (2) of the nuts over each screw.
3. Attach the screws (with nuts) to the holes located in the bottom corners of the UA-150H.
4. Slide the grommet over the screw and nuts assembly.
5. Repeat for the other end of the UA-150H.
VIBRATION ISOLATION KIT: UA-150H
24 Ultra-Aire 150H Installer’s & Owner’s Manual