Toshiba e-STUDIO166 - Manual (Page 26)

1 PREPARATION
24 Description of Each Component
7. USB terminal (4-pin)
With this terminal, the equipment can be connected to your PC using a commercially avail-
able USB cable.
y Use a USB2.0 Hi-Speed certified cable: USB cable supporting the USB2.0 Hi-Speed
mode (480 Mbps of transfer speed) certified by the USB Implementers Forum.
y Connect the equipment with a PC directly by the USB cable. When it is connected with a
PC via a USB hub, the equipment may not be recognized.
8. Receiving tray
9. Scanning area
The data of originals transported from the Automatic Document Feeder (optional, MR-2017)
are scanned here.
P.100 “Daily Inspection”
10. Original scale
Use this to check the size of an original placed on the original glass.
11. Platen sheet
P.100 “Daily Inspection”