Toshiba e-STUDIO166 - Manual (Page 54)

2 HOW TO MAKE COPIES
52 Using Bypass Tray
3
Press the [COPY] button several times until the lamp of the paper
size you placed on the bypass tray is lit.
If the [FUNCTION CLEAR] button is pressed at this step, the size is not registered and
the equipment will return to its normal status.
4
Press the [START] button.
The paper size has been registered.
Registering other standard sizes
When standard size paper other than A3, A4, A4-R, A5-R or B4 is placed, register this size as
“OTHER” size. Key in the code number of the paper size to register it as “OTHER” size.
See the table below for the code number of each size.
Paper size Code No. Paper size Code No.
B5 05 LT-R 11
B5-R 06 ST-R 12
LD 08 FOLIO 13
LG 09 COMP 14
LT 10 13"LG 16