Troy-Bilt TBTB - Manual (Page 9)

REMOVING FLARE OR CONCENTRATOR
NOZZLE FROM BLOWER HOUSING
1. Grasp the nozzle and turn it counterclockwise
approximately 45˚ until the indexing button on the inside
of the nozzle snaps out of the detent in the blower
housing (Fig. 8). Pull the nozzle off of the blower housing.
Detent
Indexing Button
Fig. 8
Fig. 10
Fig. 9
9
OPERATING INSTRUCTIONS
USING THE FLARE NOZZLE
Use the flare nozzle for large, hard surfaces such as
driveways and sidewalks (Fig. 9).
USING THE CONCENTRATOR NOZZLE
Use the concentrator nozzle for hard to reach places
such as corners in a garage or to control dust in a dust
laden environment (Fig. 10).