Texas Instruments WRL-10 - Manual (Page 11)

Texas Weather Instruments, Inc. 11 WRL Instruction Manual
Logging Mode
Press select and time hold at the same time to enter logging mode (note that all the trend
indicators are on when in this mode).
Time/Date
Temperature
Barometer/Humidity
Rainfall
W EATHER REPORT
Clear Minimum Select Maximum Scale
Hold
Last
Hold
Comfort
Hold
Windchill
Hold
Report
76
10:23
29 .9 2
2.3 5
.
Logging mode allows the user to view previously logged data via the display. (You can
only enter logging mode if there is data in the logging memory). You may choose what
interval of time you would like the data saved through the print set routine. Once in logging
mode, press the minimum or maximum key to move forward or backward through the data.
The date and time of the line of date will be displayed in the time/date window. If you have
a printer connected to the display, pressing the report key from within the logging mode,
directs the WRL to output data from the data displayed point forward. Press the select
button again to exit logging mode. The WRL will start writing over the oldest data records
in memory with new data when the capacity of the memory is achieved.
Print Set Mode
There are two settings that will affect the deposition of data. The first, report interval,
determines how often the WRL will automatically dump data to the RS-232 port. The