Tandy 23-401 - Manual (Page 7)

7
The conditioner/charger beeps one
short beep and the red CHARGE LED
lights.
Caution: The supplied AC adapter
supplies 13.5 volts DC and delivers up
to 1000 mA. It has a center positive
plug which properly fits the conditioner/
charger’s
DC 12V-24V jack. Using an
adapter that does not meet these
specifications could damage the bat-
tery conditioner/charger or the adapt-
er.
Using Your Vehicle’s Battery
Power
You can power the conditioner/charger
from your vehicle’s cigarette lighter
socket using the supplied DC power
cord.
Caution: The supplied DC power cord
connects your conditioner/charger to
your vehicle battery power and lets it
draw 12–13.5 volts DC, and up to 1000
mA. It has a center positive plug which
properly fits the conditioner/charger’s
DC 12V-24V jack. Using an adapter or
power cord that does not meet these
specifications could damage the bat-
tery conditioner/charger or the adapt-
er.
Plug the supplied DC adapter’s barrel
plug into the conditioner/charger’s
DC
12V-24V jack, then plug the DC adapter
cigarette-lighter plug into the vehicle’s
cigarette-lighter socket.
Caution: Before plugging the DC
adapter’s cigarette-lighter plug into the
cigarette-lighter socket, make sure the
knurled ring is screwed firmly onto the
plug. See “Replacing the DC Power
Cord’s Fuse” on Page 11.
The conditioner/charger beeps one
short beep and the red CHARGE LED
lights.
Using your vehicle’s
battery power
23-401.fm Page 7 Friday, August 6, 1999 2:35 PM