Toshiba D-KR4SU - Manual (Page 45)

45
Pla
ybac
k
Recor
ding
Editing
Other
s
Intr
oduction
Function setup
Remaining volume
1) Press EASY NAVI.
EASY NAVI Main Menu appears.
2) Press / / / to select “Timer Recording”,
then press SELECT/ENTER.
REC MENU appears.
3) Press QUICK MENU.
Quick Menu appears.
4) Press / to select “Disc budget calculation”
then press SELECT/ENTER.
Disc budget calculation menu appears.
5) Press / to select a timer program, then
press SELECT/ENTER or press ADJUST.
The recorder calculates on a bar graph how much
a specific program (identified by a check mark) will
occupy on the disc.
Pressing ADJUST button can display or remove the
check mark.
e.g.
6) Correct the parameters of the timer program if
necessary.
(Skip to step 8), if you do not need this.)
You can change “Video”.
Select an item you want to modify and press
SELECT/ENTER button. The item will be ready to
be altered. Press ADJUST button to modify. When
complete, press SELECT/ENTER button.
You can adjust to a lower mode to reduce the
quality of the recording, and thus provide more disc
capacity (space).
7) Press .
Program modification is registered.
8) Press EASY NAVI to exit the GUI.
REC
MENU
Disc budget calculation 9:00 pm 4/3 (Su)
11 1.4 D/M1 DVD
CH
3 4/10 (Sa) 30 : : –
–
–
–
:
:
: :
:
:
pm 11 50 pm EP
9 1.4 D/M1 DVD 10 4/13 (Tu) 30 pm 10 00 pm EP
10 2.2 D/M1 DVD 42 4/16 (Fr) 30 am 11 30 am LP
8 4.6 D/M1 DVD 4 4/16 (Fr) 30 pm 9 30 pm SP
Audio Video Media End Result Date Start
DVD HDD Elapsed Available Selected(current) ( ) DVD
Notes
• The nearest 8 programs are calculated at a time.
• While the recorder is preparing for or executing a
programmed recording, any program modification cannot
be registered. Only programs which will start after 5
minutes or later can be modified.
• Available disc volume is not displayed for a DVD-R/RW disc
on which DVD-Video finalize process was executed.
To stop a programmed recording
To finish,
Press on the front panel twice.
When you press it once, a message appears. While
the message is displayed, press button once again.
Turning the power off automatically after
completing a programmed recording
1) While executing a programmed recording, press
QUICK MENU.
Quick Menu appears.
2) Press / to select “Auto power off” then
press SELECT/ENTER.
Keeping the power on even after the
programmed recording finished
If the recorder turns itself on to execute a programmed
recording, it will turn itself off after finishing the
recording. You can restrict this and keep the recorder
powered on.
1) While executing a programmed recording, press
QUICK MENU.
2) Press / to select “Continuous power on”
then press SELECT/ENTER.
Selected entry Available disc volume
When the entry item is marked X, the
recording does not fit. Change the setting.